com.articulate.sigma

Class Base64

java.lang.Object

com.articulate.sigma.utils.Base64

public class Base64
extends java.lang.Object

Nested Class Summary

Nested Classes

Modifier and Type	Class and Description
static class	Base64.InputStream A Base64.InputStream will read data from another java.io.InputStream, given in the constructor, and encode/decode to/from Base64 notation on the fly.
static class	Base64.OutputStream A Base64.OutputStream will write data to another java.io.OutputStream, given in the constructor, and encode/decode to/from Base64 notation on the fly.

Field Summary

Fields

Modifier and Type	Field and Description
static int	DECODE Specify decoding in first bit.
static int	DO_BREAK_LINES Do break lines when encoding.
static int	DONT_GUNZIP Specify that gzipped data should not be automatically gunzipped.
static int	ENCODE Specify encoding in first bit.
static int	GZIP Specify that data should be gzip-compressed in second bit.
static int	NO_OPTIONS No options specified.
static int	ORDERED Encode using the special "ordered" dialect of Base64 described here: http://www.faqs.org/qa/rfcc-1940.html.
static int	URL_SAFE Encode using Base64-like encoding that is URL- and Filename-safe as described in Section 4 of RFC3548: http://www.faqs.org/rfcs/rfc3548.html.

Method Summary

Modifier and Type	Method and Description
static byte[]	decode(byte[] source) Low-level access to decoding ASCII characters in the form of a byte array.
static byte[]	decode(byte[] source, int off, int len, int options) Low-level access to decoding ASCII characters in the form of a byte array.
static byte[]	decode(java.lang.String s) Decodes data from Base64 notation, automatically detecting gzip-compressed data and decompressing it.
static byte[]	decode(java.lang.String s, int options) Decodes data from Base64 notation, automatically detecting gzip-compressed data and decompressing it.
static void	decodeFileToFile(java.lang.String infile, java.lang.String outfile) Reads infile and decodes it to outfile.
static byte[]	decodeFromFile(java.lang.String filename) Convenience method for reading a base64-encoded file and decoding it.
static void	decodeToFile(java.lang.String dataToDecode, java.lang.String filename) Convenience method for decoding data to a file.
static java.lang.Object	decodeToObject(java.lang.String encodedObject) Attempts to decode Base64 data and deserialize a Java Object within.
static java.lang.Object	decodeToObject(java.lang.String encodedObject, int options, java.lang.ClassLoader loader) Attempts to decode Base64 data and deserialize a Java Object within.
static void	encode(java.nio.ByteBuffer raw, java.nio.ByteBuffer encoded) Performs Base64 encoding on the raw ByteBuffer, writing it to the encoded ByteBuffer.
static void	encode(java.nio.ByteBuffer raw, java.nio.CharBuffer encoded) Performs Base64 encoding on the raw ByteBuffer, writing it to the encoded CharBuffer.
static java.lang.String	encodeBytes(byte[] source) Encodes a byte array into Base64 notation.
static java.lang.String	encodeBytes(byte[] source, int options) Encodes a byte array into Base64 notation.
static java.lang.String	encodeBytes(byte[] source, int off, int len) Encodes a byte array into Base64 notation.
static java.lang.String	encodeBytes(byte[] source, int off, int len, int options) Encodes a byte array into Base64 notation.
static byte[]	encodeBytesToBytes(byte[] source) Similar to encodeBytes(byte[]) but returns a byte array instead of instantiating a String.
static byte[]	encodeBytesToBytes(byte[] source, int off, int len, int options) Similar to encodeBytes(byte[], int, int, int) but returns a byte array instead of instantiating a String.
static void	encodeFileToFile(java.lang.String infile, java.lang.String outfile) Reads infile and encodes it to outfile.
static java.lang.String	encodeFromFile(java.lang.String filename) Convenience method for reading a binary file and base64-encoding it.
static java.lang.String	encodeObject(java.io.Serializable serializableObject) Serializes an object and returns the Base64-encoded version of that serialized object.
static java.lang.String	encodeObject(java.io.Serializable serializableObject, int options) Serializes an object and returns the Base64-encoded version of that serialized object.
static void	encodeToFile(byte[] dataToEncode, java.lang.String filename) Convenience method for encoding data to a file.

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Detail

NO_OPTIONS

public static final int NO_OPTIONS

No options specified. Value is zero.

See Also:

Constant Field Values

ENCODE

public static final int ENCODE

Specify encoding in first bit. Value is one.

See Also:

Constant Field Values

DECODE

public static final int DECODE

Specify decoding in first bit. Value is zero.

See Also:

Constant Field Values

GZIP

public static final int GZIP

Specify that data should be gzip-compressed in second bit. Value is two.

See Also:

Constant Field Values

DONT_GUNZIP

public static final int DONT_GUNZIP

Specify that gzipped data should not be automatically gunzipped.

See Also:

Constant Field Values

DO_BREAK_LINES

public static final int DO_BREAK_LINES

Do break lines when encoding. Value is 8.

See Also:

Constant Field Values

URL_SAFE

public static final int URL_SAFE

Encode using Base64-like encoding that is URL- and Filename-safe as described in Section 4 of RFC3548: http://www.faqs.org/rfcs/rfc3548.html. It is important to note that data encoded this way is not officially valid Base64, or at the very least should not be called Base64 without also specifying that is was encoded using the URL- and Filename-safe dialect.

See Also:

Constant Field Values

ORDERED

public static final int ORDERED

Encode using the special "ordered" dialect of Base64 described here: http://www.faqs.org/qa/rfcc-1940.html.

See Also:

Constant Field Values

Method Detail

encode

public static void encode(java.nio.ByteBuffer raw,
                          java.nio.ByteBuffer encoded)

Performs Base64 encoding on the raw ByteBuffer, writing it to the encoded ByteBuffer. This is an experimental feature. Currently it does not pass along any options (such as DO_BREAK_LINES or GZIP.

Parameters:

raw - input buffer

encoded - output buffer

Since:

2.3

encode

public static void encode(java.nio.ByteBuffer raw,
                          java.nio.CharBuffer encoded)

Performs Base64 encoding on the raw ByteBuffer, writing it to the encoded CharBuffer. This is an experimental feature. Currently it does not pass along any options (such as DO_BREAK_LINES or GZIP.

Parameters:

raw - input buffer

encoded - output buffer

Since:

2.3

encodeObject

public static java.lang.String encodeObject(java.io.Serializable serializableObject)
                                     throws java.io.IOException

Serializes an object and returns the Base64-encoded version of that serialized object.

As of v 2.3, if the object cannot be serialized or there is another error, the method will throw an java.io.IOException. This is new to v2.3! In earlier versions, it just returned a null value, but in retrospect that's a pretty poor way to handle it.

The object is not GZip-compressed before being encoded.

Parameters:

serializableObject - The object to encode

Returns:

The Base64-encoded object

Throws:

java.io.IOException - if there is an error

java.lang.NullPointerException - if serializedObject is null

Since:

1.4

encodeObject

public static java.lang.String encodeObject(java.io.Serializable serializableObject,
                                            int options)
                                     throws java.io.IOException

Serializes an object and returns the Base64-encoded version of that serialized object.

As of v 2.3, if the object cannot be serialized or there is another error, the method will throw an java.io.IOException. This is new to v2.3! In earlier versions, it just returned a null value, but in retrospect that's a pretty poor way to handle it.

The object is not GZip-compressed before being encoded.

Example options:

   GZIP: gzip-compresses object before encoding it.
   DO_BREAK_LINES: break lines at 76 characters
 

Example: encodeObject( myObj, Base64.GZIP ) or

Example: encodeObject( myObj, Base64.GZIP | Base64.DO_BREAK_LINES )

Parameters:

serializableObject - The object to encode

options - Specified options

Returns:

The Base64-encoded object

Throws:

java.io.IOException - if there is an error

Since:

2.0

See Also:

GZIP, DO_BREAK_LINES

encodeBytes

public static java.lang.String encodeBytes(byte[] source)

Encodes a byte array into Base64 notation. Does not GZip-compress data.

Parameters:

source - The data to convert

Returns:

The data in Base64-encoded form

Throws:

java.lang.NullPointerException - if source array is null

Since:

1.4

encodeBytes

public static java.lang.String encodeBytes(byte[] source,
                                           int options)
                                    throws java.io.IOException

Encodes a byte array into Base64 notation.

Example options:

   GZIP: gzip-compresses object before encoding it.
   DO_BREAK_LINES: break lines at 76 characters
     Note: Technically, this makes your encoding non-compliant.
 

Example: encodeBytes( myData, Base64.GZIP ) or

Example: encodeBytes( myData, Base64.GZIP | Base64.DO_BREAK_LINES )

As of v 2.3, if there is an error with the GZIP stream, the method will throw an java.io.IOException. This is new to v2.3! In earlier versions, it just returned a null value, but in retrospect that's a pretty poor way to handle it.

Parameters:

source - The data to convert

options - Specified options

Returns:

The Base64-encoded data as a String

Throws:

java.io.IOException - if there is an error

java.lang.NullPointerException - if source array is null

Since:

2.0

See Also:

GZIP, DO_BREAK_LINES

encodeBytes

public static java.lang.String encodeBytes(byte[] source,
                                           int off,
                                           int len)

Encodes a byte array into Base64 notation. Does not GZip-compress data.

As of v 2.3, if there is an error, the method will throw an java.io.IOException. This is new to v2.3! In earlier versions, it just returned a null value, but in retrospect that's a pretty poor way to handle it.

Parameters:

source - The data to convert

off - Offset in array where conversion should begin

len - Length of data to convert

Returns:

The Base64-encoded data as a String

Throws:

java.lang.NullPointerException - if source array is null

java.lang.IllegalArgumentException - if source array, offset, or length are invalid

Since:

1.4

encodeBytes

public static java.lang.String encodeBytes(byte[] source,
                                           int off,
                                           int len,
                                           int options)
                                    throws java.io.IOException

Encodes a byte array into Base64 notation.

Example options:

   GZIP: gzip-compresses object before encoding it.
   DO_BREAK_LINES: break lines at 76 characters
     Note: Technically, this makes your encoding non-compliant.
 

Example: encodeBytes( myData, Base64.GZIP ) or

Example: encodeBytes( myData, Base64.GZIP | Base64.DO_BREAK_LINES )

As of v 2.3, if there is an error with the GZIP stream, the method will throw an java.io.IOException. This is new to v2.3! In earlier versions, it just returned a null value, but in retrospect that's a pretty poor way to handle it.

Parameters:

source - The data to convert

off - Offset in array where conversion should begin

len - Length of data to convert

options - Specified options

Returns:

The Base64-encoded data as a String

Throws:

java.io.IOException - if there is an error

java.lang.NullPointerException - if source array is null

java.lang.IllegalArgumentException - if source array, offset, or length are invalid

Since:

2.0

See Also:

GZIP, DO_BREAK_LINES

encodeBytesToBytes

public static byte[] encodeBytesToBytes(byte[] source)

Similar to encodeBytes(byte[]) but returns a byte array instead of instantiating a String. This is more efficient if you're working with I/O streams and have large data sets to encode.

Parameters:

source - The data to convert

Returns:

The Base64-encoded data as a byte[] (of ASCII characters)

Throws:

java.lang.NullPointerException - if source array is null

Since:

2.3.1

encodeBytesToBytes

public static byte[] encodeBytesToBytes(byte[] source,
                                        int off,
                                        int len,
                                        int options)
                                 throws java.io.IOException

Similar to encodeBytes(byte[], int, int, int) but returns a byte array instead of instantiating a String. This is more efficient if you're working with I/O streams and have large data sets to encode.

Parameters:

source - The data to convert

off - Offset in array where conversion should begin

len - Length of data to convert

options - Specified options

Returns:

The Base64-encoded data as a String

Throws:

java.io.IOException - if there is an error

java.lang.NullPointerException - if source array is null

java.lang.IllegalArgumentException - if source array, offset, or length are invalid

Since:

2.3.1

See Also:

GZIP, DO_BREAK_LINES

decode

public static byte[] decode(byte[] source)
                     throws java.io.IOException

Low-level access to decoding ASCII characters in the form of a byte array. Ignores GUNZIP option, if it's set. This is not generally a recommended method, although it is used internally as part of the decoding process. Special case: if len = 0, an empty array is returned. Still, if you need more speed and reduced memory footprint (and aren't gzipping), consider this method.

Parameters:

source - The Base64 encoded data

Returns:

decoded data

Throws:

java.io.IOException

Since:

2.3.1

decode

public static byte[] decode(byte[] source,
                            int off,
                            int len,
                            int options)
                     throws java.io.IOException

Low-level access to decoding ASCII characters in the form of a byte array. Ignores GUNZIP option, if it's set. This is not generally a recommended method, although it is used internally as part of the decoding process. Special case: if len = 0, an empty array is returned. Still, if you need more speed and reduced memory footprint (and aren't gzipping), consider this method.

Parameters:

source - The Base64 encoded data

off - The offset of where to begin decoding

len - The length of characters to decode

options - Can specify options such as alphabet type to use

Returns:

decoded data

Throws:

java.io.IOException - If bogus characters exist in source data

Since:

1.3

decode

public static byte[] decode(java.lang.String s)
                     throws java.io.IOException

Decodes data from Base64 notation, automatically detecting gzip-compressed data and decompressing it.

Parameters:

s - the string to decode

Returns:

the decoded data

Throws:

java.io.IOException - If there is a problem

Since:

1.4

decode

public static byte[] decode(java.lang.String s,
                            int options)
                     throws java.io.IOException

Decodes data from Base64 notation, automatically detecting gzip-compressed data and decompressing it.

Parameters:

s - the string to decode

options - encode options such as URL_SAFE

Returns:

the decoded data

Throws:

java.io.IOException - if there is an error

java.lang.NullPointerException - if s is null

Since:

1.4

decodeToObject

public static java.lang.Object decodeToObject(java.lang.String encodedObject)
                                       throws java.io.IOException,
                                              java.lang.ClassNotFoundException

Attempts to decode Base64 data and deserialize a Java Object within. Returns null if there was an error.

Parameters:

encodedObject - The Base64 data to decode

Returns:

The decoded and deserialized object

Throws:

java.lang.NullPointerException - if encodedObject is null

java.io.IOException - if there is a general error

java.lang.ClassNotFoundException - if the decoded object is of a class that cannot be found by the JVM

Since:

1.5

decodeToObject

public static java.lang.Object decodeToObject(java.lang.String encodedObject,
                                              int options,
                                              java.lang.ClassLoader loader)
                                       throws java.io.IOException,
                                              java.lang.ClassNotFoundException

Attempts to decode Base64 data and deserialize a Java Object within. Returns null if there was an error. If loader is not null, it will be the class loader used when deserializing.

Parameters:

encodedObject - The Base64 data to decode

options - Various parameters related to decoding

loader - Optional class loader to use in deserializing classes.

Returns:

The decoded and deserialized object

Throws:

java.lang.NullPointerException - if encodedObject is null

java.io.IOException - if there is a general error

java.lang.ClassNotFoundException - if the decoded object is of a class that cannot be found by the JVM

Since:

2.3.4

encodeToFile

public static void encodeToFile(byte[] dataToEncode,
                                java.lang.String filename)
                         throws java.io.IOException

Convenience method for encoding data to a file.

As of v 2.3, if there is a error, the method will throw an java.io.IOException. This is new to v2.3! In earlier versions, it just returned false, but in retrospect that's a pretty poor way to handle it.

Parameters:

dataToEncode - byte array of data to encode in base64 form

filename - Filename for saving encoded data

Throws:

java.io.IOException - if there is an error

java.lang.NullPointerException - if dataToEncode is null

Since:

2.1

decodeToFile

public static void decodeToFile(java.lang.String dataToDecode,
                                java.lang.String filename)
                         throws java.io.IOException

Convenience method for decoding data to a file.

As of v 2.3, if there is a error, the method will throw an java.io.IOException. This is new to v2.3! In earlier versions, it just returned false, but in retrospect that's a pretty poor way to handle it.

Parameters:

dataToDecode - Base64-encoded data as a string

filename - Filename for saving decoded data

Throws:

java.io.IOException - if there is an error

Since:

2.1

decodeFromFile

public static byte[] decodeFromFile(java.lang.String filename)
                             throws java.io.IOException

Convenience method for reading a base64-encoded file and decoding it.

As of v 2.3, if there is a error, the method will throw an java.io.IOException. This is new to v2.3! In earlier versions, it just returned false, but in retrospect that's a pretty poor way to handle it.

Parameters:

filename - Filename for reading encoded data

Returns:

decoded byte array

Throws:

java.io.IOException - if there is an error

Since:

2.1

encodeFromFile

public static java.lang.String encodeFromFile(java.lang.String filename)
                                       throws java.io.IOException

Convenience method for reading a binary file and base64-encoding it.

As of v 2.3, if there is a error, the method will throw an java.io.IOException. This is new to v2.3! In earlier versions, it just returned false, but in retrospect that's a pretty poor way to handle it.

Parameters:

filename - Filename for reading binary data

Returns:

base64-encoded string

Throws:

java.io.IOException - if there is an error

Since:

2.1

encodeFileToFile

public static void encodeFileToFile(java.lang.String infile,
                                    java.lang.String outfile)
                             throws java.io.IOException

Reads infile and encodes it to outfile.

Parameters:

infile - Input file

outfile - Output file

Throws:

java.io.IOException - if there is an error

Since:

2.2

decodeFileToFile

public static void decodeFileToFile(java.lang.String infile,
                                    java.lang.String outfile)
                             throws java.io.IOException

Reads infile and decodes it to outfile.

Parameters:

infile - Input file

outfile - Output file

Throws:

java.io.IOException - if there is an error

Since:

2.2